Leave Your Message
Products Categories
Featured Products

Firing Head Systems for TCP Guns

The firing heads are designed to detonate shaped charges conveyed by tubing, drillpipe, coiled tubing or slickline. 

    Mechanical Firing Head with Drop Bar

    The mechanical firing head is a debris-proof design used to fire guns in TCP operations. During operation, the drop bar is released at the wellhead, impacts the firing pin, shears the shear pin on the firing pin assembly, and then the firing pin strikes and detonates the detonator, thereby detonating the perforator.

    Specifications

    Type

    O.D. (mm)

    Pressure Rating (MPa)

    73

    73

    90

    86

    86

    90

    93

    93

    90

    Safety Mechanical Firing Head

    The Safety mechanical Firing Head is used in TCP to detonate guns. The safety mechanical firing head require both action, drop bar action unlock and hydrostatic actuate. Without enoughhy drostatic pressure acts on firing head, the impact detonator could not be detonated.

    Specifications

    Type

    O.D. (mm)

    Pressure Rating (MPa)

    73

    73

    140

    86

    86

    140

    93

    93

    140

    Hydraulic Firing Head

    The Hydraulic Firing Head is used for oil and gas well TCP completion operations, where it detonates the detonation tube or detonating cord to trigger the shaped charge. As a pressure detonator, it is activated by a wellhead pressurization device. This firing head was developed specifically for pressure-firing applications, including highly deviated and horizontal wells. It can be used with a time delay booster and can be placed either at the top or bottom of the TCP gun string.

    Specifications

    Type

    O.D. (mm)

    Charge Type

    43

    43

    90/140

    51

    51

    90/140

    73

    73

    90/140

    80

    80

    90/140

    86

    86

    90/140/175

    93

    93

    90/140/175

    Hydraulic Firing Head with Auto Vent

    The hydraulic firing head with auto vent is a type of pressure detonator used in oil and gas well TCP completion operations. It is activated by applying pressure internally to the tubing string via a wellhead pressurization device, which detonates the detonation tube or detonating cord, thereby detonating the perforating guns and triggering the shaped charges.

    Specifications

    Type

    O.D. (mm)

    Pressure Rating (MPa)

    73

    73

    90/140

    86

    86

    90/140/175

    93

    93

    90/140/175

    Top Dual Redundant Firing Head

    The Top Dual Redundant Firing Head is designed to be run on top of a TCP gun string. It provides two independent methods to fire the percussion detonator and initiate the perforating gun string. This dual functionality is achieved by integrating an impact firing head into a pressure-activated firing head. Such redundancy gives operators the flexibility to choose either activation method, while also offering a backup in case the primary method fails to detonate the system.

    Specifications

    Type

    Perforator Type

    Charge Type

    73

    73

    90/140

    80

    80

    90/140/175

    86

    86

    90/140/175

    93

    93

    90/140/175

    Mechanical Firing Head with Automatic Gun Release

    The Mechanical Firing Head with Automatic Gun Release enables operators to safely and reliably detonate and release the perforating assembly downhole. Activation is achieved by the impact of a drop bar: upon striking, the drop bar shears a safety retaining washer and drives the firing pin downward to initiate a percussion initiator. The resulting detonation propagates through the main body of the firing head, which then automatically releases the gun system into the wellbore. Once released, the perforating gun assembly drops away, leaving an open-ended tubing with a wireline entry guide in place.

    Specifications

    O.D. (mm)

    93

    Pressure Rating (MPa)

    140

    Min. Firing Hydrostatic (MPa)

    5

    Min. Release Hvdrostatic (MPa)

    5

    Min. Release Weights (Kg)

    150

    I.D. After Release (mm)

    62

    Max. Safe Weights (Kg)

    40,000

    Hydraulic Firing Head with Automatic Gun Release

    The Hydraulic Firing Head with Automatic Gun Release enables operators to safely and reliably detonate and release the perforating assembly downhole. Activation is achieved by applying hydraulic pressure. Upon pressure application, the resultant detonation propagates through the main body of the firing head, which then automatically releases the gun system into the wellbore. The perforating gun assembly drops away, leaving an open-ended tubing with a wireline entry guide in place.

    Specifications

    O.D. (mm)

    93

    Pressure Rating (MPa)

    140

    Min. Firing Hydrostatic (MPa)

    5

    Min. Release Hvdrostatic (MPa)

    5

    Min. Release Weights (Kg)

    150

    I.D. After Release (mm)

    62

    Max. Safe Weights (Kg)

    40,000

    Request A Quote
    Need a Consultation? Contact Us 24/7
    Describe your specific request*
    bg-contact