0102030405
High-Quality Jet Cutter for Downhole Engineering - China Suppliers & Factory for Safe Pipe Recovery
Specifications
| No. | Jet Cutter Type | O.D. (mm) |
Temperature Rating (°C) |
Pressure Rating (MPa) |
Cutting Object | ||
|---|---|---|---|---|---|---|---|
| O.D. (mm) |
O.D. (in) |
I.D. (mm) |
|||||
| 1 | SCQG-43Y | 43 | 170°C / 24h | 120 | 60 | 2 3/8 | 47.4 |
| 2 | SCQG-54Y | 54 | 120 | 73 | 2 7/8 | 62 | |
| 3 | SCQG-68Y | 68 | 120 | 89 | 3 1/2 | 76 | |
| 4 | SCQG-89Y | 89 | 70 | 114 | 4 1/2 | 93.5 – 100.53 | |
| 5 | SCQG-102T | 102 | 70 | 127 | 5 | 108 – 114 | |
| 6 | SCQG-110T | 110 | 80 | 140 | 5 5/8 | 118 – 125 | |
| 7 | SCQG-140T | 140 | 90 | 178 | 7 | 150 – 164 | |
| 8 | SCQG-215T | 215 | 50 | 244 | 9 5/8 | 220 – 226 | |
Frequently Asked Questions
Q
What is the maximum temperature rating for the SCQG series jet cutters?
Most models in the SCQG-Y series (SCQG-43Y through SCQG-68Y) are rated for temperatures up to 170°C for 24 hours, making them suitable for high-temperature downhole environments. Other models vary between 50°C and 90°C depending on the specific type.
Q
What is the difference between the "Y" and "T" type jet cutters in this series?
The Y-type models (e.g., SCQG-43Y, SCQG-54Y, SCQG-68Y, SCQG-89Y) are designed for smaller tubing sizes ranging from 2 3/8" to 4 1/2" O.D., while the T-type models (e.g., SCQG-102T through SCQG-215T) are engineered for larger casing and tubing sizes from 5" up to 9 5/8" O.D.
Q
Which jet cutter model is suitable for cutting 7" casing?
The SCQG-140T model is designed to cut 7-inch (178 mm O.D.) casing with an internal diameter range of 150–164 mm. Its tool O.D. is 140 mm and it supports a pressure rating of up to 90 MPa.
Q
What pressure ratings are available across the SCQG jet cutter range?
Pressure ratings vary by model: the Y-type models (SCQG-43Y, SCQG-54Y, SCQG-68Y) are rated at 120 MPa; SCQG-89Y and SCQG-102T at 70 MPa; SCQG-110T at 80 MPa; SCQG-140T at 90 MPa; and SCQG-215T at 50 MPa.
Q
Can the SCQG-215T be used to cut 9 5/8" casing?
Yes. The SCQG-215T is specifically designed to cut 9 5/8" (244 mm O.D.) casing. It accommodates an internal diameter range of 220–226 mm and has a tool O.D. of 215 mm with a pressure rating of 50 MPa.
Q
How do I select the correct jet cutter model for my application?
Selection should be based on three key parameters: (1) the O.D. and I.D. of the tubing or casing to be cut, (2) the downhole temperature at the cutting depth, and (3) the available wellbore pressure. Match these values against the specification table above to identify the appropriate model. For custom requirements or technical support, please contact our engineering team directly.



