Leave Your Message
Products Categories
Featured Products

Sinker Bar Assembly for Oilfield

The sinker bar is mainly used to increase the weight of the downhole pipe string, so that the weight of the pipe string into the well is greater than the top pressure, so that the pipe string can be lowered into the well smoothly. There are two kinds of materials: lead sinker bar and steel sinker bar, which can be chosen according to the construction needs.

    Product Description

    The sinker bar is mainly used to increase the weight of the downhole pipe string, so that the weight of the pipe string into the well is greater than the top pressure, so that the pipe string can be lowered into the well smoothly. There are two kinds of materials: lead sinker bar and steel sinker bar, which can be chosen according to the construction needs.

    Schematic diagram of sinker bar:

    Sinker Bar (2)

    Lead Sinker Bar Specifications

    Type

    Overall Length (mm)

    Weight

    (kg)

    Temperature Rating (°C)

    Pressure Rating (MPa)

    WJZ-43

    1235

    25

    200

    120

    1535

    31

    1800

    38

    2300

    48

    WJZ-73

    1235

    62

    160

    1535

    71

    1800

    99

    2300

    126

    WJZ-86

    1235

    86

    1535

    108

    1800

    128

    2300

    167

    WJZ-89

    1235

    91

    1535

    116

    1800

    139

    2300

    180

    Steel Sinker Bar Specifications

    Type

    Overall Length (mm)

    Weight

    (kg)

    Temperature Rating (°C)

    Pressure Rating (MPa)

    GJZ-43

    1235

    14

    200

    120

    1535

    18

    1800

    21

    2300

    28

    GJZ-73

    1235

    40

    160

    1535

    49

    1800

    59

    2300

    75

    GJZ-86

    1235

    54

    1535

    68

    1800

    80

    2300

    102

    GJZ-89

    1235

    58

    1535

    72

    1800

    81

    2300

    106

    Precautions for safe use

    1. Before going down the well, the instrument must be connected to the ground instrument, check whether the instrument insulation, on-off is good, and whether the insulation resistance value reaches the use requirements.
    2. Other instruments connected to this instrument, the use of small pipe pliers appropriate force to fasten, do not use excessive force.
    3. After the instrument is used, it must be cleaned, and the instrument status should be tested, and the problems found should be repaired in time.
    4. This product must be used with the same pressure, temperature level seals and other accessories.
    5. For others not specified, please be sure to follow the safety operation regulations of API RP-67 or follow the relevant government regulations, company regulations and manufacturer's recommendations for actual operation.
    Request A Quote
    Need a Consultation? Contact Us 24/7
    Describe your specific request*
    bg-contact